GWR Pagoda style Station room building with open doors and glazing - OO9/OO/HO

A Nice GWR Pagoda Style station waiting room building with open doors and glazing 

FAQ – Product FAQs

GWR Pagoda Style Station Waiting Room – FAQ

What exactly is included with this GWR Pagoda style waiting room?

This listing includes two grey resin printed pieces that together form the GWR pagoda style station waiting room with open doors and glazing. The photos showing a painted model are for illustration only and are not included.

What are the dimensions of the building?

The footprint of the building is approximately 60mm x 28mm, and it is about 46mm tall. It is sized to work well as a small station waiting room or a building for a country halt.

Is the model supplied painted or assembled?

The model is supplied unprimed and unpainted, with all supports removed. Items are cleaned and cured by hand and may be unassembled if needed, ready for you to prime, paint, and finish to suit your layout.

What style of building is this based on?

The design is influenced by the classic GWR pagoda huts used throughout the Great Western Railway network. The doors are modelled in the open position to represent a waiting room in use rather than closed up for the night.

Is this suitable for any particular type of layout?

This waiting room is well suited to small stations and country halts. Its compact footprint makes it easy to fit into modest layouts while still giving a distinctly GWR feel once painted and detailed.

What material is the model made from?

The building is resin printed in grey. All pieces are cleaned, cured, and supplied ready for you to prime and paint, with supports removed.

How is the model finished before shipping?

Each piece is cleaned and cured by hand after printing. All supports are removed, and we do our best to smooth away support marks. The model is then shipped from stock, ready for you to prime and paint.

Is any sanding or extra preparation needed?

Although we carefully remove supports, some fine sanding may still be required in places to achieve the smoothest finish before priming and painting.

Does the model actually have glazing?

The building is designed and printed with glazing detail included as part of the model. It arrives unpainted, so you can pick out the glazing with your chosen painting technique.

Can I use this as something other than a waiting room?

Yes, while it is intended as a GWR-style waiting room, many modellers also use similar huts as small offices, stores, or staff rooms on their layouts, depending on the scene they are creating.

Is this a kit or a single-piece model?

This listing is for two resin printed pieces that form the building. They arrive unassembled if needed, ready for you to test-fit, glue if required, and then prime and paint.

What should I do if the model arrives broken?

If your item is damaged in the post, please take clear photos of the damage and get in touch. We cannot be responsible for breakages after safe delivery, but we will always do our best to help with issues that occur during shipping.

The surface looks slightly rough in places. Is this normal?

Minor marks or texture where supports were attached are normal with resin printing. We remove supports and clean the model, but a little fine sanding before priming will usually give you a very smooth finish ready for paint.

My model seems slightly warped or out of shape. What can I do?

A slight warp can sometimes be eased by very gently warming the part (for example, in lukewarm water), carefully straightening it, and then allowing it to cool fully while held in the correct position. Always test on a small area first and avoid excessive heat.

Some small details look fragile. How should I handle them?

Resin can be quite delicate, especially on thinner details. Handle the model by the more solid areas, avoid squeezing or twisting, and keep it away from drops or knocks while you are working on it.

There is a slight residue on the model. Do I need to clean it?

The pieces are cleaned and cured before shipping, but if you prefer, you can give them a gentle wash in lukewarm water with a tiny amount of mild detergent, then allow them to dry completely before priming.

The doors and glazing look a bit cloudy after priming. Is that expected?

Yes, once primed, all surfaces will take on the colour and texture of your primer. You can restore the look of glazing with careful painting techniques or by leaving those areas masked and unprimed if you prefer a clearer effect.

What type of primer should I use?

You can use normal car primer or suitable hobby primer. A light, even coat is best. Make sure the model is completely dry and free of dust before spraying or brushing on primer.

Can I paint the model with acrylics?

Yes, acrylic paints work very well on this resin model once it has been properly primed. Many modellers use acrylics for both base colours and weathering effects.

Do I need to assemble anything before painting?

If your particular set arrives as separate pieces, it is often easiest to test-fit, lightly sand any joints, and then either glue before painting or paint sub-assemblies and glue later. Choose the approach that best suits your painting style and access to details.

Any tips for painting it to look like a real GWR hut?

A good approach is to apply a neutral primer, then build up thin layers of colour for the walls and roof, followed by subtle dry-brushing and washes to bring out the panel lines and texture. Picking out the open doors and glazing frames in slightly contrasting tones really helps the waiting room look “in use.”

How can I protect the paintwork once I have finished?

Once the paint is fully dry, you can apply a light coat of clear matt or satin varnish suitable for acrylics and resin. This helps protect the finish from handling and dust while the building is on your layout.