6 x Laser Cut Rural Farm Gates For OO / HO / OO9 SCALE / 1:76 Model Railways

Precision Laser Cut Rural Gates & Posts for 00/HO and OO9 Model railway layouts

The gates and posts are supplied pre-cut on laserboard and this kit is very very easy to assemble.

Supplied in this pack are 6 rural style gates to use on your layouts and dioramas. Everything is cut from specialist 0.9mm polybak laserboard which gives a scale thickness and does not sacrifice strength or distorts. The material is very easily painted with acrylic paints to give a realistic finish and can be weathered too. 

In the pack there are 2 of each design. A large style 5 bar crooked heel gate, a normal style 5 bar gate and a 5 bar gate suitable for pedestrians. Plastic farmer is not included, just shown for scale.

To provide added realism double the quantity of gate posts are supplied so that they can be glued together in pairs to represent a thicker post. 

The parts are all held in place on the fret with short sections that can be cut through with a modelling knife. Orders are shipped immediately from stock and come in card backed 'Do Not Bend' enevelopes to protect them in the mail.

---

FAQ – Product FAQs

Frequently Asked Questions – Precision Laser Cut Rural Gates & Posts

What scale are these gates and posts designed for?

These gates and posts are designed for 00/HO and OO9 model railway layouts and dioramas, giving you correctly scaled rural fencing for typical British and European scenes.

What exactly do I get in one pack?

Each pack contains six rural style gates cut from 0.9 mm polybak laserboard, plus enough posts to allow you to double them up for extra thickness and realism. There are two of each gate design in the pack.

What gate designs are included?

You receive three different five‑bar gate styles, with two of each design: a large 5‑bar crooked heel gate, a standard 5‑bar gate, and a 5‑bar pedestrian gate.

What material are the gates made from?

The gates and posts are cut from specialist 0.9 mm polybak laserboard. This gives a realistic scale thickness while remaining strong and resistant to distortion.

Are figures or scenery items included?

No. Any figures shown in photos, such as the plastic farmer, are for scale reference only and are not included in the pack.

How are the kits packaged and shipped?

Orders are shipped from stock in card‑backed “Do Not Bend” envelopes to protect the laserboard frets in the post.

How easy is this kit to assemble?

The kit is designed to be very easy to assemble. All parts are pre‑cut on the laserboard fret and only need to be carefully released and glued together. It is suitable for modellers with limited kit‑building experience.

Do the posts need to be doubled up?

They do not have to be, but the pack includes double the number of posts specifically so you can glue them together in pairs. This creates thicker, more realistic gate posts for added visual impact.

Can these gates be used on dioramas as well as layouts?

Yes. They are ideal for both model railway layouts and standalone dioramas, especially rural, farm, or countryside scenes in 00/HO or OO9 scale.

Do the gates actually open and close?

The product is supplied as laser‑cut parts intended to be assembled as static scenic items. Any working features would need to be added by the modeller using their own methods and materials.

Are instructions included?

The parts are straightforward to identify and assemble, and the design is intentionally simple. If you are familiar with basic modelling tools and glues, you should have no difficulty putting them together.

Can I combine multiple packs on one layout?

Yes. Using several packs is a good way to create visual variety across a larger layout, especially if you mix the different gate types in different locations.

My parts seem difficult to remove from the fret. What should I do?

The parts are held in place by small tabs. Use a sharp modelling knife and a cutting mat, and gently score through the tabs rather than forcing the parts out. Take your time around delicate bars to avoid damage.

The laserboard bends when I cut parts out. How can I prevent this?

Support the fret close to where you are cutting and make several light passes with the knife instead of one heavy cut. This reduces stress on the laserboard and helps keep the parts flat.

I accidentally snapped a gate bar. Can I still use the gate?

In many cases you can. Carefully realign the broken bar and glue it back in place, then allow it to dry fully before painting. A slightly repaired bar can actually add to a weathered, well‑used rural look.

The posts don’t look thick enough on my layout. Any tips?

Use the extra posts supplied to double them up: glue two identical posts back‑to‑back, clamp or hold them flat while the glue dries, and then paint. This gives a more substantial, realistic post thickness.

My acrylic paint is making the parts warp. What am I doing wrong?

Apply paint in thin coats and avoid soaking the laserboard. It helps to paint both sides of the piece so moisture is balanced. Let each coat dry thoroughly before adding the next to minimise warping.

How do I separate the posts so I can glue them in pairs?

Cut through the small joining tabs on the fret with a sharp modelling knife. Once free, pair up matching posts, align the edges carefully, and glue them together to form a thicker post.

What glue should I use for assembly?

A good quality PVA or similar craft glue works very well on laserboard. Apply sparingly with a fine brush or cocktail stick so it does not flood the delicate gate bars.

When should I paint the gates and posts – before or after assembly?

Many modellers prefer to assemble first and then paint, as this avoids paint on glue joints. However, you can pre‑paint the frets if you keep glue areas free of paint. Either approach works if you use thin coats.

How can I achieve a realistic wood finish with acrylics?

Start with a mid‑brown base coat, then lightly dry‑brush lighter tones along the grain direction of the gate bars and posts. You can add subtle grey or green washes to suggest age and weathering.

Can these gates be weathered to match an older rural scene?

Yes. The laserboard takes weathering very well. Use thinned acrylic washes, dry‑brushing, and a little darker colour around the bottom of posts to suggest mud, rot, and general countryside grime.

Any tips for mounting the finished gates on my layout?

Pre‑drill or pierce small holes in your baseboard or scenery where the posts will go, test‑fit the assembly, then fix in place with a small amount of glue. Make sure the gates sit vertical and in line with any fencing.