OO Type 42 Wickham Inspection car - NEW

This is a model of a Wickham Type 42 Inspection car to use on a Tenshodo Spud chassis. The spud fits easily into place and uses the screw that comes with the spud. The main body is also a drop fit onto the sub chassis to allow for painting prior to assembly. The kit is printed using high detail resin in the UK. 

The sale is for the body , the sub-chassis and tool boxes only, it is unpainted and without the tenshodo spud which is shown for information purposes only.

The first picture shows the kit with a coat of grey primer so you can see how good the finish is, the kit also comes with optional fitting tool boxes that can be glued into place with superglue if required.

If you search on google for "Tenshodo motor bogie" you will find them easily. Anything up to the 26mm wheelbase will work with these.

The kit may require some minor finishing if required before painting. Condition is New and is dispatched by Royal Mail. Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres. 

FAQ – Product FAQs

Wickham Type 42 Inspection Car Kit – Frequently Asked Questions

What exactly do I get in this kit?

You receive the Wickham Type 42 Inspection car body, the sub-chassis and the optional tool boxes. The kit is supplied unassembled (where applicable), unprimed and unpainted. The Tenshodo Spud motor bogie is not included and is shown in photos for information only.

What chassis or motor unit does this kit use?

This kit is designed to use a Tenshodo Spud (Tenshodo motor bogie). The spud fits easily into place on the sub-chassis and uses the screw supplied with the spud itself. Any Tenshodo motor bogie with a wheelbase up to 26 mm will work with this model.

Is the model ready to run out of the box?

No. This is a static body kit intended to be mounted on a Tenshodo Spud chassis. You will need to supply and fit your own Tenshodo motor bogie and then prime and paint the resin parts before you have a finished, running model.

What material is the kit made from?

The kit is printed in high-detail resin in the UK. All items are cleaned and cured by hand before packing, and all supports are removed prior to dispatch.

How is the kit packaged and shipped?

The kit is dispatched by Royal Mail. Our packaging is eco-friendly: the outer packaging is made in part from recycled materials and is fully recyclable, and the interior packing materials are acid-free and made from 99% recycled pulp fibres.

Is this kit new or second-hand?

All kits are supplied in new condition. Each set of parts is freshly printed, cleaned, cured and packed before dispatch.

My Tenshodo Spud doesn’t seem to fit properly. What should I check?

First, confirm that your Tenshodo motor bogie has a wheelbase of 26 mm or less. Ensure that any moulding pips or flash on the spud are removed and that the mounting area on the sub-chassis is free of dust and paint. The spud should drop into place and secure using the screw that comes with the spud.

The body doesn’t sit squarely on the sub-chassis. How can I fix this?

The main body is designed as a drop fit onto the sub-chassis. If it sits unevenly, check for:

• Paint build-up on the mating surfaces
• Small resin nibs or support marks left on the sub-chassis edges
• Any distortion from heat or rough handling

Gently sand any high spots until the body drops on cleanly and sits level.

I can still see faint support marks. Is this normal?

Yes. We do our very best to remove support marks, but some fine sanding may still be required before priming. Lightly smooth any visible marks with fine abrasive paper or sanding sticks to achieve the finish you prefer.

My kit arrived damaged in the post. What should I do?

If the piece has been damaged during postage, please take clear photos of the parts and the packaging and contact us. We will review the images and do what we can to help put things right.

A part broke after I started handling it. Can you replace it?

Resin can be quite delicate and may break if dropped or stressed. We cannot be held responsible for breakages once the item has arrived safely. However, you are welcome to get in touch and we will advise on possible repairs or options.

Do I need to do any preparation before painting?

All pieces are cleaned, cured and supplied with supports removed, but the kit may require some minor finishing before painting. We recommend:

• Inspecting for any fine support marks and lightly sanding them
• Checking all mating surfaces for a smooth fit
• Washing the parts in mild soapy water and letting them dry fully before priming

How should I assemble the body and sub-chassis?

The main body is designed as a drop fit onto the sub-chassis. Many modellers prefer to:

• Prime and paint the body and sub-chassis separately
• Fit and secure the Tenshodo Spud to the sub-chassis using the spud’s screw
• Finally drop the painted body onto the sub-chassis once everything is dry

You can fix the body permanently with a small amount of suitable adhesive if you wish, but it is not essential.

When should I fit the optional tool boxes?

The tool boxes are optional parts that can be glued into place with superglue if required. Many builders find it easiest to:

• Test-fit the tool boxes on the sub-chassis or body first
• Glue them once you are happy with the position
• Prime and paint the whole assembly afterwards

What primer and paint should I use on the resin?

Use a good-quality primer that is suitable for resin model kits. The first example image shows the kit with a coat of grey primer to highlight the surface finish. Once primed, you can use your usual model paints (acrylic or enamel) according to the paint manufacturer’s guidance for resin.

Any tips for handling and working with the resin parts?

Resin is detailed but delicate, so:

• Avoid dropping the parts or applying twisting force to thin sections
• Use fine files or sanding sticks rather than heavy tools
• Dry-fit parts before gluing to avoid unnecessary stress on the resin