Ebdon Lane Halt and Milk Stand along with 12 Milk Churns - OO9/OO/HO

A Country Station Halt and Milk Platform inspired by the Ebdon Lane Halt.

This set of structures takes their inspiration from the Ebdon lane Halt and Milk platform that was once present on the Weston Clevedon & Portishead Railway. The halt provided a rain proof shelter for passengers and the milk platform allowed farmers to ready their milk churns for collection. 
The footprint of the halt is 28mm x 28mm x 34mm high. The milk platform is 32mm x 30mm and 24mm high. The platform also comes with two sets of 6 milk churns. 

When painted, this is a nice addition to any layout and it's small size means that you can add both passenger and farm traffic easily. It can be painted with normal car primer and model acrylic paints.

The model is shipped from stock and is ready to paint. This listing is for four resin printed pieces. The pictures showing it painted with other vehicles are for information only and are not included. 

Finishing: All items are cleaned and cured by hand. They are unassembled (if needed). Ready for you to prime and paint.

We do our very best to remove support marks, but some fine sanding may be required.

All pieces and parts come unprimed and unpainted with all supports removed.

Remember, the delicacy of resin calls for gentle handling. Though we can't be responsible for accidents after delivery, we're here to assist if any mishaps occur during transit. Just provide us with images, and we'll explore ways to lend a helping hand.

Embrace the charm of railway history with our Ground Frame Hut – a tribute to the enchanting architecture that shaped the past and now enriches your model railway universe.

FAQ – Product FAQs

What exactly is included with this Country Station Halt and Milk Platform set?

This listing includes four resin-printed pieces: the country station halt, the milk platform, and two sets of six milk churns (12 churns in total). All items are supplied unassembled (if needed), unprimed, and unpainted, with all supports removed. Any painted models, vehicles, figures, or scenic items shown in photos are for illustration only and are not included.

What are the dimensions of the halt and milk platform?

The halt has a footprint of approximately 28mm x 28mm and is 34mm high. The milk platform measures approximately 32mm x 30mm and is 24mm high. These compact dimensions make it easy to fit into smaller scenes while still being a focal point on your layout.

What prototype inspired this model?

This set is inspired by the Ebdon Lane Halt and milk platform on the former Weston, Clevedon & Portishead Railway. The halt provided a rainproof shelter for passengers, while the adjacent platform allowed local farmers to set out their milk churns for collection, capturing a lovely slice of rural railway life.

Is the model ready to use straight out of the box?

The pieces arrive cleaned, cured, and with supports removed, but they are intended for you to finish. They come unprimed and unpainted, and some light assembly may be required. Once primed and painted, they are ready to be placed on your layout.

What type of paint and primer should I use?

The model can be painted with normal car primer and model acrylic paints. A light coat of automotive or hobby primer will help paint adhere to the resin, and acrylics are ideal for building up colour and weathering. Always apply thin coats to preserve surface detail.

How does this set fit into a layout theme?

The small footprint makes it ideal for branch lines, light railways, and rural scenes. It works especially well where you want to show both passenger and agricultural traffic in a compact area, such as a wayside halt serving local farms with milk churn traffic.

Why does the resin feel delicate, and how should I handle it?

Resin allows for fine detail but can be more brittle than some other modelling materials. Handle the pieces gently, especially thin edges and corners. When sanding or assembling, support the parts close to where you’re working and avoid twisting or bending them.

What should I do if my model arrives damaged in transit?

If something has clearly happened during shipping, take clear photos of the packaging and the damaged parts and contact the seller. While accidents after delivery can’t be covered, they are happy to help explore options if the damage occurred in transit.

Are the support marks completely removed?

All items are cleaned and cured by hand, and supports are removed before shipping. Every effort is made to minimise support marks, but you may find a few small areas that benefit from fine sanding to achieve a perfectly smooth finish.

Can I combine this halt with other railway buildings?

Yes, it pairs nicely with other small lineside structures such as huts, small goods sheds, or ground frames to create a believable rural stopping place. Its modest size means it can be tucked into a corner or used as a secondary halt on a larger layout.

Is this suitable for beginners in model building?

Yes, it’s a good project for beginners. The parts are simple, the footprint is small, and it doesn’t require complex assembly. As long as you’re comfortable with basic sanding, priming, and painting, you should find it a rewarding build.

Can I leave the model unpainted?

You can, but it will look more realistic and be better protected if primed and painted. Paint helps to seal the resin, hides any minor sanding marks, and brings out the character of the halt and milk platform on your layout.

The pieces don’t seem to sit flat on the baseboard. What can I do?

Occasionally a resin piece may have a very slight warp or uneven base. To fix this:

• Place the model on a sheet of fine wet-and-dry paper laid on a flat surface.
• Gently rub the base in small circles until it sits flat.
• Check frequently to avoid removing too much material.

Once flat, you can bed it into your scenery with glue and scenic materials.

There are small lines or rough patches on the surface. How do I smooth them?

Minor layer lines or support marks can be tidied up with gentle sanding:

• Use fine-grit sanding sticks or wet-and-dry paper (around 600–1000 grit).
• Sand lightly, keeping to the direction of the surface detail.
• Rinse off dust and let the piece dry before priming.

After priming, inspect the surface; a second light sand and re-prime may give an even smoother finish.

The primer isn’t adhering well. What might be wrong?

If primer beads or doesn’t stick evenly, it’s usually due to surface contamination:

• Wash the parts gently in lukewarm water with a drop of mild detergent.
• Use a soft brush to remove any residue.
• Rinse thoroughly and allow to dry completely before re-priming.

A light mist coat of primer first, followed by a second pass, often improves adhesion.

A small detail has snapped off. Can I repair it?

Many small breaks can be repaired with cyanoacrylate (super glue):

• Dry-fit the broken piece to ensure alignment.
• Apply a tiny amount of glue to one surface.
• Hold in place until set, then leave to cure fully.

For very fine breaks, you can reinforce the joint with a small fillet of thick primer or paint once the glue has cured.

How should I store the unpainted model if I’m not building it right away?

Store the pieces in a box or drawer where they won’t be crushed, away from direct sunlight and excessive heat. Wrap them in tissue or bubble wrap to prevent scuffs, and keep all parts together so nothing goes missing before you start assembly.

Do I need to assemble anything, or is it all one piece?

The listing notes that items are unassembled if needed, so you may receive separate pieces for easier printing and cleaning. Any assembly required is straightforward, typically involving aligning flat surfaces and gluing them together. Always dry-fit first to understand how the parts go together.

What glue should I use for assembly?

For resin parts, cyanoacrylate (super glue) is the most convenient choice. Apply sparingly to avoid excess squeeze-out. For a little more working time, a two-part epoxy can also be used, especially for load-bearing joints like the base of the platform.

How should I prepare the surface before priming?

Before priming:

• Inspect the model for any remaining support marks and sand lightly if needed.
• Wash the parts in lukewarm, mildly soapy water and rinse well.
• Allow them to air-dry completely.

This helps ensure the primer and paint adhere cleanly and evenly.

Any tips for painting the halt and milk platform realistically?

To bring out the character of the halt and platform:

• Use a neutral or weathered base colour for the structure, then add lighter dry-brushing to pick out edges.
• Pick out doors, trim, and the milk churns in contrasting but muted tones.
• Add subtle weathering with washes and powders to suggest rain streaks, foot traffic, and farm grime.

Building up colour in thin layers will keep the details crisp.

How can I paint the milk churns to look used but not derelict?

For convincing churns:

• Start with a metallic base (such as aluminium or steel) or a muted grey.
• Add a thin brown wash around the base and handles to suggest dirt and handling.
• Finish with a light dry-brush of a lighter metallic or grey on edges to represent wear.

Grouping them in small clusters on the platform completes the scene nicely.