OO9 Narrow Gauge Guards Van Kit for Peco NR-121D 10ft WB Chassis Resin Body

Bring character and realism to your OO9 narrow gauge layout with this finely detailed OO9 Guards Van body kit. Designed to fit perfectly onto the Peco NR-121D 10ft wheelbase chassis, it’s ideal for adding authentic rolling stock to quarry, industrial, or light railway scenes. Easy to assemble and paint, this lightweight resin body transforms a standard Peco chassis into a fully detailed Guards Van for your OO9 layout.

🔧 Kit Contents:

• 1 × Unpainted resin Guards Van body

• OO9 scale – runs on 9mm track (N gauge track, OO scale proportions)

• Designed to fit Peco NR-121D chassis (not included)

• Painted model shown for reference only

🧩 Modelling Skills Required:

Beginner level – simply fit to chassis, paint the body, and you’re ready to go.

🎨 Finishing & Assembly Notes:

• All resin parts are UV-cured and hand-finished to remove supports

• Supplied unpainted and unassembled – ready for priming and painting

• Use Simonez or automotive primer, then finish with acrylic paints

• Minor sanding or clean-up may be required

• Resin is fragile – handle with care

• We cannot accept responsibility for damage after delivery

OO9 Guards Van Body Kit – Frequently Asked Questions

What exactly is included in this OO9 Guards Van body kit?

The kit includes one unpainted resin Guards Van body in OO9 scale. It is supplied unpainted and unassembled, ready for you to prime, paint, and fit onto a suitable chassis. The Peco NR-121D chassis and any paints, primers, or couplings are not included.

Which chassis does this body fit?

The body is designed specifically to fit the Peco NR-121D 10ft wheelbase chassis. The chassis is not included with the kit and must be purchased separately.

What scale and track does this kit use?

This is an OO9 scale kit, which means it represents OO scale narrow gauge stock running on 9 mm track (the same gauge as N gauge track). It is ideal for quarry, industrial, or light railway style layouts.

What skill level is this kit suitable for?

The kit is aimed at beginner-level modellers. Assembly is straightforward: fit the resin body to the chassis, apply primer, then paint. Some minor sanding or clean-up of the resin may be required, but no advanced skills or tools are expected.

Is the model supplied painted like the photos?

No. Any painted model shown is for reference only. The kit is supplied unpainted and unassembled so you can finish it in your own livery and weathering style.

Is the resin strong enough for regular running?

The resin is UV-cured and hand-finished, providing good detail and stability for normal layout use. However, resin is inherently fragile, so it should be handled carefully, especially during assembly, painting, and when placing it on or off the track.

Why doesn’t the body fit my Peco NR-121D chassis properly?

First check that you are using the correct Peco NR-121D 10ft wheelbase chassis. If the fit is tight, gently remove any small moulding lines or support remnants from the inside of the body with fine sandpaper or a needle file. Test-fit regularly and avoid forcing the body onto the chassis.

The resin surface looks slightly rough or has small marks. Is this normal?

Yes. All parts are UV-cured and hand-finished to remove supports, so minor surface marks or a slight texture can appear. Lightly sand the affected areas with fine wet-and-dry paper before priming. This will help give a smoother finish once painted.

My paint is not adhering well to the body. What should I do?

Ensure the body is clean and free from dust or grease. Wash it gently in warm, mild soapy water, rinse, and allow to dry thoroughly. Apply a suitable primer such as Simonez or automotive primer in light coats, let it cure fully, and then apply acrylic paints on top.

The body seems slightly warped or twisted. Can it be fixed?

Minor warping can often be corrected by very gently warming the resin in lukewarm (not boiling) water, carefully straightening it by hand, and then holding it in the correct position while it cools. Work slowly and cautiously to avoid cracking the resin.

Part of the resin body broke during handling. Can you replace it?

The resin is fragile and must be handled with care. As noted, responsibility for damage after delivery cannot be accepted. Small breaks can often be repaired with a good quality cyanoacrylate (super glue) and careful sanding once cured.

How do I prepare the resin body before painting?

First, inspect the body for any remaining support marks or flash and gently sand them away. Then wash the body in warm, mild soapy water, rinse, and let it dry completely. Once dry, apply a thin coat of Simonez or automotive primer to give the paint a good surface to key to.

What primer and paint should I use?

A Simonez or automotive primer works well on this UV-cured resin. Apply in light coats to avoid obscuring detail. After the primer has fully cured, use acrylic paints for the main colours and details. Acrylics adhere well and are easy to work with on resin surfaces.

How do I attach the body to the Peco NR-121D chassis?

Test-fit the body onto the chassis first, checking for any tight spots and lightly sanding if necessary. Once you are happy with the fit, you can either leave it as a friction fit (if secure) or use small, carefully applied spots of a suitable adhesive to fix it in place. Avoid getting glue into the wheel or coupling areas.

Any tips for painting and finishing the van for a realistic look?

After priming, build up colour with thin coats of acrylic paint, allowing each coat to dry. Pick out details such as doors and planking with slightly varied shades to add depth. A simple weathering approach is to use thin washes of darker acrylics and dry-brushing lighter tones on edges and raised detail. Always let layers dry fully before handling.