G-scale model scenery - the Postbox collection - GN15 (unpainted)

---

FAQ – Product FAQs

What exactly do I get with this Post Box set?

You receive two grey resin-printed pieces: one free-standing post box and one wall-mounted post box. They are supplied unprimed and unpainted, with all supports removed, ready for you to finish to suit your layout.

What scale are these post boxes suitable for?

These pieces are designed for G-scale layouts and also work very nicely in GN15 scenes. They are ideal for town or village settings on model railways or dioramas in those scales.

Are the painted post box and figure in the photos included?

No, the painted post box and the figure shown in any example images are not included. They are there purely to show how the pieces can look once painted and placed on a layout.

Do the items come assembled?

All items are supplied unassembled if any assembly is required, though these particular post boxes are typically single-piece prints. They arrive ready for you to prime, paint, and install on your layout.

Are the pieces ready to paint straight away?

Yes. Each piece is cleaned and cured by hand, and all supports are removed. You may wish to do a little fine sanding in places to achieve your preferred finish before priming and painting.

How delicate are these resin post boxes?

Resin can be quite delicate, especially at thinner sections and edges. They are perfectly suitable for normal layout use, but you should avoid dropping them or applying excessive pressure when handling or fitting them.

My post box arrived broken in the post, what should I do?

If your item arrives damaged from shipping, please take clear photos of the damage and the packaging and contact the seller. They will review the images and see what they can do to help resolve the issue.

There are faint marks where supports were removed. Is this normal?

Yes, slight support marks are normal with resin printing. The maker does their very best to remove support marks during cleanup, but a little fine sanding may still be needed in some areas for a perfectly smooth finish.

The surface feels slightly rough in places. How can I improve it?

Use fine-grit sandpaper or sanding sticks to gently smooth any rough or stepped areas, especially around curves and edges. Work slowly and check often so you do not remove too much detail before priming.

The piece seems a bit flexible or “soft.” Is something wrong?

Resin parts can feel slightly different depending on temperature and resin formulation, but each item is fully cleaned and UV-cured before shipping. As long as there are no sticky areas or obvious uncured patches, a little flex is normal on thin sections.

What should I do if a small detail snaps off while handling?

If a small part breaks during handling, you can usually repair it with a good-quality cyanoacrylate (super glue). Carefully align the broken surfaces, apply a tiny amount of glue, and hold in place until set. Once repaired and painted, the join is often barely visible.

Can I fix a warped base or slightly bent part?

If a part arrives slightly warped, very gentle warming (for example in warm, not boiling, water) and careful bending can sometimes help, but this must be done cautiously to avoid further damage. If the warping is severe, contact the seller with photos before attempting a fix.

How should I prime these resin post boxes?

Use a primer suitable for plastic or resin miniatures. Spray or brush-on primers both work, as long as they adhere well to resin. Apply light, even coats and allow the primer to dry fully before adding colour.

What paints are recommended for a classic red post box look?

The example shown uses a simple scheme with Tamiya paints: Tamiya Black X-1, Red X-7, and White X-2. You can follow this combination or use equivalent colours from your preferred paint range for a traditional post box appearance.

Do I need to wash the pieces before painting?

The pieces are already cleaned and cured by hand, so they are generally ready to prime. If you wish, you can give them a quick rinse in mild soapy water, then allow them to dry completely before priming, especially if you have handled them a lot with bare hands.

How can I mount the free-standing post box securely on my layout?

For a solid fit, drill a small locating hole in your baseboard or scenery where the post box will stand, and use a dab of strong model glue to fix it in place. You can then blend the base into the surrounding ground with scenic materials once the glue has cured.

How should I attach the wall-mounted post box?

Decide on the wall or building where you want it installed, then lightly sand the back of the post box and the contact area on the wall if needed. Use a small amount of suitable model glue to fix it in place, holding it steady until the bond is firm.

Any tips for adding extra realism when painting?

After your main colours are applied, you can add subtle weathering with thin washes or dry-brushing to pick out details and edges. A light dark wash in recesses and a gentle highlight on raised areas will help the post boxes look right at home on a busy station street or village corner.