GN15 ,G scale Grit Bin for work yards, stations and factories

G-Scale model Grit Bin to add a touch of authenticity to your workshop, factory setup, or any miniature setting. Crafted with precision and attention to detail, this model Grit Bin comes complete with a working lid, making it an ideal addition to your collection or display. 

Your order will come with the following great pieces : 
Anvil, 51mm x 31 mm x 30mm high 
This listing is for two resin printed pieces in grey, the bin and lid and a piece of brass rod to make the hinge.

Painted example is for reference only and the model is supplied unpainted and without Grit or salt.  

Finishing: All items are cleaned and cured by hand. They are unassembled (if needed). Ready for you to prime and paint. We do our very best to remove support marks but some fine sanding may be required. All pieces and parts come unprimed and unpainted with all supports removed. 

Please do bear in mind that resin can be quite delicate so try to avoid dropping your parts! Sadly, we can't be held responsible for breakages once your item has arrived. However, if the piece is broken in the post, please provide images and we'll see what we can do to help.

FAQ – Product FAQs

G-Scale Grit Bin – Frequently Asked Questions

What exactly is included with this G-Scale Grit Bin?

Your order includes two grey resin printed pieces (the grit bin and its separate working lid) plus a piece of brass rod to create the hinge. The painted example in the photos is for reference only; the model is supplied unpainted and without grit or salt.

What scale is this model and what scenes does it suit?

This is a G-Scale model grit bin, ideal for garden railways, workshop and factory scenes, depot yards, or any industrial or maintenance area in your miniature layout.

What are the dimensions of the grit bin?

The grit bin is approximately 51 mm x 31 mm x 30 mm high, making it a compact but noticeable detail piece for your layout or diorama.

What material is the grit bin made from?

The bin and lid are resin printed in grey. The hinge is made from the supplied brass rod, which you fit yourself during assembly.

Is the lid really functional?

Yes. The lid is a separate piece and, once you fit the brass rod as a hinge, it can be opened and closed, adding a bit of interactive detail to your scene.

Is the model ready to use straight out of the box?

The model is cleaned and cured, with supports removed, but it is supplied unpainted and unassembled where needed. You will need to fit the hinge and carry out any priming, painting, and final finishing yourself.

Why are there small marks or lines on the surface of my model?

Because the pieces are resin printed, very fine layer lines or faint support marks may remain even after cleaning. We do our best to remove support marks, but a little light sanding with fine-grit abrasive is sometimes needed before priming to get the smoothest finish.

My grit bin arrived with a slight warp or bend. What should I do?

Minor warping can sometimes be eased by gently warming the resin in lukewarm (not boiling) water, carefully bending it back into shape, and holding it in position while it cools. Always handle the part gently and avoid excessive force, as resin can be delicate.

The lid does not sit correctly on the bin. How can I fix this?

Check that the hinge holes are clear and that the brass rod is straight and properly aligned. You can lightly sand or ream the hinge points so the rod passes through smoothly. Ensure there is no paint or debris preventing the lid from closing flush on the bin.

What if the brass rod is too tight or too loose in the hinge?

If the rod is too tight, gently widen the hinge holes with a fine drill bit or needle file until the lid moves freely. If it is too loose, you can carefully crimp the hinge areas or use a tiny dab of thick paint or varnish to add a bit of friction once everything is painted and dry.

My model arrived broken. Can it be replaced?

If the piece has been damaged in the post, please take clear photos of the damage and the packaging and contact us. We will review the images and see what we can do to help. Breakages after safe delivery (for example, from dropping the model) are not covered, as resin is delicate.

How fragile is the resin, and how should I handle it?

Resin is quite delicate, especially at thin sections like edges and corners. Avoid dropping the model, applying heavy pressure, or storing it under weight. When sanding, assembling, or painting, support the part with your fingers and work slowly to prevent snapping or chipping.

How do I assemble the bin and lid with the brass rod hinge?

Dry-fit everything before gluing. Slide the brass rod through the hinge points on the bin and lid to check alignment and movement. Once you are happy, you can trim the rod to length and, if desired, secure it with a tiny spot of glue at one end, taking care not to glue the lid solid unless you want a fixed position.

Do I need to clean the parts before priming and painting?

The parts are already cleaned and cured, but it is still good practice to give them a quick rinse in mild soapy water, then let them dry fully. This removes any remaining dust or handling residues and helps primer adhere better.

What type of primer and paint should I use?

Most hobby primers and acrylic model paints work well on cured resin. Use a suitable plastic or resin primer in light coats, then build up your colour with thin layers of paint. Always follow the instructions for your chosen products and allow each coat to dry thoroughly.

How can I make the grit bin look more realistic?

After priming and base-coating, you can add weathering to suggest outdoor use. Techniques that work well include:

• Dry-brushing lighter tones on edges to highlight wear.
• Applying washes into recesses to bring out detail.
• Adding subtle dirt, rust, or grime effects around the lid and base.

Can I fill the bin with real grit or other materials?

The model is supplied without grit or salt, but you can add your own scenic materials if you wish. Fine ballast, sand, or similar products can be glued inside the bin. Just avoid overfilling or using very heavy materials that might stress the hinge or walls.

Do I need to glue the lid in place, or can it stay movable?

You can choose either approach. If you want a working lid, assemble the hinge with the brass rod and avoid gluing the moving parts. If you prefer a fixed pose (open or closed), you can glue the lid in your chosen position once painted and weathered.