Signal Frame Ground Hut with levers and glazing - OO9/OO/HO

A Ground Frame Hut Inspired by one at Buckfastleigh Station
A ground frame hut with glazing and ground frame.

This building takes its inspiration from a similar hut at Buckfastleigh station and the footprint of this model is 22m x 27mm x 41mm high. This unique structure captures the essence of the huts that adorned railway networks of yesteryears essential to house lever frames that controlled the points and signals nearby.

This kit comes with a separate roof, glazing, and lever frame that can be placed inside.

When painted, this is a nice addition to any layout. It can be painted with normal car primer and acrylic paints.

The model is shipped from stock and is ready to paint. This listing is for three resin printed pieces in grey. The pictures showing it painted are for examples only and are not included.

Finishing: All items are cleaned and cured by hand. They are unassembled (if needed). Ready for you to prime and paint.

We do our very best to remove support marks, but some fine sanding may be required.

All pieces and parts come unprimed and unpainted with all supports removed.

Remember, the delicacy of resin calls for gentle handling. Though we can't be responsible for accidents after delivery, we're here to assist if any mishaps occur during transit. Just provide us with images, and we'll explore ways to lend a helping hand.

Embrace the charm of railway history with our Ground Frame Hut – a tribute to the enchanting architecture that shaped the past and now enriches your model railway universe.

FAQ – Product FAQs

What exactly is included with this Ground Frame Hut kit?

This kit includes three separate grey resin-printed pieces: the main hut body, a separate roof, and a lever frame that can be placed inside. Clear glazing is also provided for the windows. All parts are supplied unassembled (where applicable), unprimed, and unpainted, with supports removed.

What are the dimensions of the finished model?

The footprint of the model is approximately 22mm x 27mm, with a height of about 41mm once assembled. This makes it a compact lineside structure suitable for many model railway layouts.

Is this model based on a real railway structure?

Yes. The hut is inspired by a ground frame hut at Buckfastleigh station. It captures the character of traditional huts used to house lever frames that controlled nearby points and signals.

What material is the kit made from?

The parts are resin printed. Each piece is cleaned and cured by hand, and all printing supports are removed before shipping. Resin allows for fine detail, but it does require careful handling.

Is the model ready to use straight out of the box?

The model is ready for you to assemble, prime, and paint, but it is not supplied pre-painted or pre-primed. The painted examples shown in photos are for illustration only and are not included in the kit.

How should I handle the resin parts?

Resin is delicate and benefits from gentle handling. Avoid bending thin sections and do not expose the parts to excessive heat. If any damage occurs during transit, you can contact the seller with photos so they can advise on possible solutions.

The parts arrived slightly shiny or slick. Do I need to clean them before painting?

The parts are already cleaned and cured by hand, so they are generally ready to prime. However, if you prefer, you can give them a light wash in lukewarm water with a drop of mild detergent, then rinse and let them dry completely before priming.

There are faint marks where supports were removed. Is this normal?

Yes. While every effort is made to remove support marks, some very fine marks or nubs can remain. These are normal for resin prints and can usually be removed with gentle sanding using fine-grit abrasive paper or sanding sticks.

My roof or lever frame does not seem to sit perfectly in place. What should I do?

Check for any small printing nubs or paint build-up on the mating surfaces. Lightly sand or scrape these areas until the parts sit comfortably. Test-fit the pieces before gluing, adjusting gradually rather than removing too much material at once.

A part arrived damaged in the post. Can it be fixed?

Small resin breaks can often be repaired with cyanoacrylate (super glue) and, if needed, a touch of filler. If the damage occurred during transit, contact the seller with clear photos so they can help explore options, which may include repair advice or other support.

The paint is not adhering well to the surface. How can I improve this?

Ensure the model is fully clean and dry, then apply a suitable primer, such as a light coat of normal car primer. Once the primer has cured, acrylic paints will adhere much better. Avoid handling the model with oily or greasy hands while painting.

Some details look slightly soft after priming. Did I do something wrong?

Heavy coats of primer can obscure fine detail. Use several light mist coats of primer rather than one thick coat, allowing each layer to dry before adding the next. If detail is already obscured, you can very gently polish the surface with fine abrasive and re-prime lightly.

How do I assemble the hut, roof, and lever frame?

Dry-fit all parts first to understand how they sit together. Typically, you will:

• Test-fit the lever frame inside the hut and decide its exact position.
• Glue the lever frame in place with a small amount of suitable adhesive.
• Fit the glazing inside the window openings.
• Attach the roof once you are happy with the interior placement and glazing.

Should I paint the parts before or after assembly?

Both approaches work, but many modellers prefer to:

• Prime and base-coat the interior and lever frame separately.
• Install and touch up the interior details.
• Add glazing.
• Then attach and paint the roof and complete exterior weathering.

This helps you reach interior areas more easily.

What paints and primers are recommended?

The model can be painted with normal car primer followed by acrylic paints. Spray car primer gives a good key on resin, and acrylics are ideal for both base colours and weathering. Always apply in thin coats to preserve detail.

How do I fit the glazing without making a mess?

Cut the glazing to size if needed and test-fit first. Use a clear-drying adhesive that is safe for plastics and apply it sparingly around the window frames, not on the visible area of the glazing. Allow it to dry fully before handling the model.

Any tips for making the hut look more realistic on my layout?

Once painted, you can:

• Add gentle weathering with washes and dry-brushing to pick out brickwork and timber detail.
• Dust the lower walls and steps with earth tones to blend into your scenery.
• Place the hut near points or signals, with a path or cinders around it to suggest regular use.

Small touches like these help the hut sit naturally in your model railway scene.