OO Type 42 Wickham Inspection car with static display option

This is a model of a Wickham Type 42 Inspection car to use on a Tenshodo Spud chassis. The spud fits easily into place and uses the screw that comes with the spud. The main body is also a drop fit onto the sub chassis to allow for painting prior to assembly. The kit is printed using high detail resin in the UK. Also included is a dummy Spud chassis so that you can use the kit as a static display in a siding or diorama should you not wish to buy a spud. You can at a later date convert it back to a running model. 

The sale is for the body , the sub-chassis, dummy spud and tool boxes only, it is unpainted and without the real tenshodo spud which is shown for information purposes only.

The first picture shows the kit with a coat of grey primer so you can see how good the finish is, the kit also comes with optional fitting tool boxes that can be glued into place with superglue if required.

If you search on google for "Tenshodo motor bogie" you will find them easily. Anything up to the 26mm wheelbase will work with these or you can use the dummy included. 

The kit may require some minor finishing if required before painting. Condition is New and is dispatched by Royal Mail. Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres. 

FAQ – Product FAQs

General Product FAQs

What exactly is included in this Wickham Type 42 Inspection Car kit?

The sale is for the Wickham Type 42 body, the sub-chassis, a dummy Tenshodo Spud chassis and optional tool boxes only. All parts are supplied unassembled (where applicable), unpainted and unprimed. The real powered Tenshodo Spud motor bogie shown in some photos is not included and is for illustration only.

What chassis does this model use?

The kit is designed to use a Tenshodo Spud motor bogie. The spud drops into place easily and is secured using the screw that comes with the Tenshodo unit itself. The kit also includes a dummy Spud chassis if you prefer a static model.

What wheelbase Tenshodo Spud will work with this kit?

Any Tenshodo motor bogie with a wheelbase up to 26 mm will work with this Wickham Type 42 kit. If you do not have a powered Spud, you can use the included dummy chassis instead.

Is the kit ready to run out of the box?

No, this is not a ready-to-run model. It is a high-detail resin kit that requires assembly, and it is supplied without the powered Tenshodo Spud. You will need to provide your own Tenshodo motor bogie if you want a running model, and you will also need to prime and paint the parts.

Can I use this as a static model without buying a Tenshodo Spud?

Yes. The kit includes a dummy Spud chassis so you can build it as a static display model for a siding or diorama. You can always convert it later to a running model by fitting a real Tenshodo Spud motor bogie.

Where is the kit made and how is it produced?

The kit is printed in the UK using high-detail resin. All items are cleaned and cured by hand, with supports removed before dispatch. Some very minor finishing may still be required before painting.

Troubleshooting FAQs

The Tenshodo Spud does not seem to fit properly. What should I check?

First ensure you are using a Tenshodo motor bogie with a wheelbase up to 26 mm. The Spud should drop into place and be secured with the screw supplied with the Spud itself. Check for any small resin nibs or printing remnants in the mounting area and carefully remove them with a fine file or sharp blade so the bogie can sit flat.

The body does not sit cleanly on the sub-chassis. How can I fix this?

The main body is designed as a drop fit onto the sub-chassis. If it rocks or does not sit fully down, look for tiny high spots, print lines or support marks on the mating surfaces. Lightly sand these areas with fine abrasive paper until the body drops on smoothly without force.

I can still see support marks on the resin. Is this normal?

All supports are removed and we do our very best to eliminate support marks, but some fine sanding may still be required. Use very fine wet-and-dry paper or sanding sticks and work gently to smooth the surface before priming. Take care not to remove small details.

A part arrived broken. What should I do?

If the piece appears to have been damaged in the post, please take clear photos of the damage and the packaging and contact us. While we cannot be responsible for breakages after safe delivery, we will always do our best to help and make things good where postal damage is involved.

My resin parts feel delicate. How should I handle them?

Resin can be quite delicate, so avoid dropping parts or applying excessive pressure, especially to thinner sections. Handle over a soft surface when possible and support parts with two hands during test fitting and assembly to reduce the risk of breakage.

Assembly & Painting FAQs

How should I assemble the main components of the kit?

Start by test-fitting the Tenshodo Spud (or dummy Spud) into the sub-chassis and secure it with the screw supplied with the Spud if you are using a powered unit. Next, test-fit the body as a drop fit onto the sub-chassis. Once you are happy with the fit and have painted the parts, you can fix the body in place if you wish, or leave it removable for future access.

When should I fit the optional tool boxes, and how do I attach them?

The tool boxes are optional fittings that can be glued into place with superglue if required. Many modellers prefer to paint the body and tool boxes separately, then glue the tool boxes on after painting. Always dry-fit first to decide on the exact position before applying glue.

Do I need to do any surface preparation before priming?

All parts are supplied cleaned, cured and with supports removed, but the kit may require some minor finishing. Inspect the surfaces for any remaining support marks or slight print texture and gently sand these areas. Once smooth, wash the parts lightly in warm soapy water, rinse and allow to dry fully before applying primer.

What kind of primer and paint should I use?

The model is ready for you to prime and paint with your preferred model paints. Use a primer suitable for resin miniatures or model railway stock, applied in light coats to preserve detail. After priming, you can use your usual acrylic or enamel model paints, following the paint manufacturer’s instructions.

Can I paint the model before final assembly?

Yes, and in many cases it is easier. The body is designed as a drop fit onto the sub-chassis specifically to allow painting prior to final assembly. You can paint the body, sub-chassis, tool boxes and dummy or powered Spud separately, then bring everything together once the paint has fully cured.