OO H0 OO9 Gauge Single Diesel Tank on brick supports for depot

---

FAQ – Product FAQs

Diesel Depot Tank – FAQ

What exactly is this product?

This is a high-detail resin diesel depot tank mounted on brick supports, designed for model railway depots. It arrives as a physical model that just needs painting before it can be placed on your layout.

What are the dimensions of the tank?

The approximate dimensions are 57mm long x 25mm wide x 31mm tall, including the brick supports.

What scale is this model?

The description does not specify a particular scale. Please check the dimensions (57mm x 25mm x 31mm) against your layout to see how it will fit with your chosen scale.

Is the model supplied painted or unpainted?

The tank is supplied unpainted and unprimed. It is ready for you to prime and paint in your preferred colours and weathering style.

Is the model assembled when it arrives?

All items are supplied unassembled if needed. Any separate parts will arrive loose and ready for you to glue together before painting.

Where is the model produced?

The model is printed in the UK using high-detail resin. All cleaning and curing is done by hand before dispatch.

What material is the tank made from?

The tank is made from high-detail resin, printed in-house and then cleaned and cured by hand.

Is this a complete depot kit?

No, this sale is for the oil depot tank on brick supports only. Any other buildings, track, figures, or scenery shown elsewhere are not included.

Can I use this outdoors or in a garden railway?

The model is printed in resin and is primarily intended for indoor use. If used outdoors, it should be well primed, painted, and protected from prolonged direct sunlight and extremes of weather.

Is any extra detailing included?

The product description covers only the oil depot tank on its brick supports. No additional detailing parts are mentioned, so you should assume it comes as a single detailed tank unit unless otherwise stated on the product page.

Is the model ready to place straight on the layout?

Structurally it is ready, but it is supplied unpainted and unprimed. For best results, you should prime, paint, and optionally weather it before placing it on your layout.

How robust is the resin model?

Resin can be quite delicate, especially in fine details. It will be fine for normal layout use, but you should avoid dropping it or applying excessive pressure.

What should I do if the model arrives broken in the post?

If the piece is broken during shipping, please take clear photos of the damage and contact the seller. They will review the images and see what they can do to help.

Can I return it if I break it after it arrives?

The seller cannot be held responsible for breakages once the item has arrived safely. Damage caused after delivery is not normally covered.

There are faint marks where supports were removed – is this normal?

Yes. All supports are removed and the model is cleaned and cured by hand, but some fine support marks may remain. These are normal for resin printing and can usually be smoothed with light sanding.

What if the model seems slightly warped or uneven?

Mild variations can sometimes occur with resin prints. If you notice a significant warp that affects how the model sits on your layout, contact the seller with photos so they can advise on the best solution.

Some small details look soft or slightly rough – what can I do?

Minor roughness can often be improved with gentle sanding using fine-grit abrasive. Work slowly and carefully to avoid removing sharp edges or small details.

How should I handle the model during assembly and painting?

Handle the model gently, especially around thin or protruding parts. Hold it by the more solid sections where possible, and avoid flexing any fine details.

What tools do I need to prepare the model?

Useful tools include:

• Fine-grit sanding sticks or sandpaper for smoothing support marks
• A sharp craft knife for careful clean-up of any tiny nubs
• Plastic-compatible or resin-compatible glue if any assembly is required

Does the model need washing before painting?

The items are cleaned and cured by hand before dispatch, so they are ready to prime. However, some modellers like to give resin parts a quick wash in mild soapy water and let them dry fully to ensure the best paint adhesion.

Do I need to prime the model before painting?

Yes. The model is supplied unprimed, and resin always benefits from a suitable primer to help paint adhere and to reveal any small areas that may need extra sanding.

What type of primer and paint should I use?

Use a primer suitable for resin or plastic miniatures. After priming, acrylic model paints work very well. Always apply in thin coats to preserve the fine detail.

How can I achieve a realistic diesel depot look?

After priming, paint the tank in your chosen depot colours, then add:

• Subtle rust tones around seams and edges
• Oil stains and streaks running down the sides
• Weathering on the brick supports with dry-brushing and washes

Should I assemble before or after painting?

If there are separate parts, it is usually best to test-fit first, then glue the main structure together before painting. Very small or hard-to-reach details can be painted separately if needed.

How do I sand support marks without damaging detail?

Use very fine-grit sanding sticks or paper and work slowly. Focus only on the raised marks, keeping pressure light. Regularly check your progress so you do not flatten nearby rivets or surface detail.