O Gauge (1/43) O16.5 / 7mm Edwardian Seaside or Park Shelter based on Ramsgate

This is  a replica of a Ramsgate edwardian style promenade shelter, great for a seaside scene or would work well as a municipal or park shelter as well. It comes as an unpainted kit along with the seated figure, based on a 3D scan of a real person. 67mm wide x 36mm deep and about 75mm tall

This is a really unique model and not something that is generally available and would be very complicated to scratch build. 

FAQ – Product FAQs

Ramsgate Edwardian Promenade Shelter Kit – FAQ

What exactly is this model?

This is an unpainted kit of a Ramsgate Edwardian-style promenade shelter. It’s ideal for seaside layouts, but also works very well as a municipal or park shelter on a model railway or diorama.

What are the dimensions of the shelter?

The assembled shelter is approximately 67 mm wide, 36 mm deep and about 75 mm tall, making it a compact but eye-catching feature for your scene.

Does the kit include any figures?

Yes, the kit includes a seated figure based on a 3D scan of a real person, ready for you to prime and paint to suit your layout.

Is the model supplied painted or pre-primed?

No, all parts are supplied unprimed and unpainted. They are cleaned, cured and have supports removed, but you will need to prime and paint them yourself.

How difficult is the kit to assemble?

Assembly is designed to be easy. The shelter slots together using tabs incorporated into the design, so you are mainly aligning and joining the pieces rather than doing complex scratch building.

What scale is this shelter suitable for?

The product description does not specify a particular scale. Please check the listed dimensions (67 mm x 36 mm x 75 mm) against your layout to decide how it best fits your chosen scale.

What material are the parts made from?

The parts are produced in resin, which allows for fine detail but should be handled carefully as it can be delicate.

Is this a common kit or a unique piece?

This is a very unusual model and not something that is generally available. The real shelter would be complicated to scratch build, so this kit offers a convenient way to add a distinctive Edwardian feature to your layout.

Are the parts cleaned before shipping?

Yes, all items are cleaned and cured by hand before they are sent out. Support structures are removed, though a little fine sanding may still be required in places.

Can this shelter be used away from a seaside scene?

Absolutely. Although it is based on a Ramsgate promenade shelter, it works just as well as a municipal park shelter, a town square feature, or a quiet corner on a station approach.

Is any glue included with the kit?

No adhesives are included. You will need to supply your own suitable glue for resin parts.

What should I do before I start assembly?

Before assembly, it is a good idea to:

• Inspect each part for any remaining support marks or small nubs.
• Test-fit the tabbed joints so you know how the parts align.
• Lightly sand any rough spots where supports were removed.
• Plan your painting order (for example, whether to paint sub-assemblies before final assembly).

What type of glue should I use?

Use a glue that is suitable for resin, such as a good quality cyanoacrylate (super glue). Apply sparingly to avoid visible glue marks and to keep details crisp.

The tabs feel tight when I test-fit the parts. Is that normal?

A snug fit is normal, but if the tabs are too tight you can gently sand the mating surfaces until they slide together more easily. Do this gradually and test-fit often so you do not remove too much material.

Some parts seem slightly warped or out of line. How can I fix this?

If you notice minor warping, you can usually correct it by very gently flexing the part back into shape. Take care not to force the resin, as it can be delicate. If a piece is badly distorted on arrival, please contact the seller with photos.

There are faint marks where supports were removed. How do I deal with them?

Light support marks are normal with resin printing. Use fine sandpaper or sanding sticks (for example, 600–1000 grit) to smooth these areas. Work slowly and keep to the surface so you do not lose surrounding detail.

What if a part arrives broken in the post?

If something is broken on arrival, take clear photos of the damage and contact the seller. They will do their best to help once they have seen the images. Breakages after delivery, such as accidental drops, are not covered.

How can I avoid damaging the parts during assembly?

Handle each piece by the thicker sections rather than thin edges, and avoid putting pressure on fine details. Work over a soft surface so that if a part is dropped it is less likely to chip or break.

Do I need to wash the parts before painting?

The parts are cleaned and cured by hand, but many modellers still like to give resin parts a quick wash in mild soapy water, then rinse and let them dry thoroughly before priming. This can help paint adhesion.

What kind of primer should I use?

Use a primer that is suitable for resin miniatures or models. A fine surface primer, either brush-on or spray, works well. Apply light coats to preserve the sharpness of the details.

How should I paint the shelter for an Edwardian seaside look?

Traditional seaside shelters often used light, cheerful colours. You might try:

• A light or cream tone for the main structure.
• Darker trim (greens, reds or blues) to pick out the framework.
• Weathering with subtle washes and dry-brushing to suggest age and exposure to sea air.

Should I paint before or after assembly?

Many modellers find it easiest to paint in sub-assemblies: for example, painting the main shelter structure and the seated figure separately, then doing final touch-ups after assembly. Test-fit the parts first so you know which areas will be visible.

How do I paint the seated figure?

Prime the figure first, then build up thin layers of paint. Start with base colours for clothing and skin, then add simple highlights and shadows. Even basic shading will bring out the detail from the 3D scan.

Can I weather the model to look older or more used?

Yes, weathering really brings this kind of structure to life. You can use:

• Thin washes to pick out panel lines and recesses.
• Dry-brushing on edges to suggest wear.
• Subtle streaking to hint at rain marks or seaside grime.

How can I protect the paintwork once I am finished?

After the paint is fully dry, apply a clear varnish suitable for miniatures or models. Choose matte, satin or gloss depending on the look you want. A protective coat helps prevent handling wear on both the shelter and the figure.