1:43 Scale O Gauge Model Railway Penny Farthing model - Double Pack

Here are two 7mm O-Gauge Victorian Penny Farthings or High riders.  These were certainly popular pre-grouping, but still ridden in modern times as well. Generally they fell out of favour as pneumatic tyres and gears were introduced and solved those problems that the Penny Farthing overcame. 

Supplied are two resin Penny Farthings , the figure and painted examples are just shown for reference. Easily primed with car primer and painted with acrylic paints. I chose a white/cream tyre as black rubber tyres were not introduced until after the turn of the century.  Model is approx 33mm tall.

The model is printed here in the UK  using high detail resin. The model is supplied unpainted and can be primered with halfords grey primer or tamiya fine surface primer.

All items are cleaned and cured by hand, and the figures may require some minor finishing if needed before painting. The condition is new and they are dispatched by Royal Mail 2nd class.

Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres.

Please do bear in mind that resin can be quite delicate so try to avoid dropping your parts! Sadly, we cant be held responsible for breakages once your item has arrived. However, if the piece is broken in the post, please provide images and we will see what we can do to help to make things good.

Needless to say these items are not toys and are not suitable for minors as they could be a choking hazard because of small parts. 

FAQ – Product FAQs

Frequently Asked Questions – 7mm O-Gauge Victorian Penny Farthings

What exactly is included in this product?

You receive two 7mm O-gauge Victorian Penny Farthing (high rider) bicycles, printed in high-detail resin. Any figures or painted examples shown in photos are for reference only and are not included.

What scale and size are these models?

The Penny Farthings are 7mm O-gauge (approximately 1:43 scale). Each model is approximately 33mm tall, making them ideal for O-scale and O-16.5 layouts and dioramas.

Are the models supplied painted or unpainted?

The models are supplied unpainted. The painted examples shown are to give you an idea of how they can look once finished.

What material are the Penny Farthings made from?

They are printed in the UK using high-detail resin. All items are cleaned and cured by hand before dispatch.

How are the models packaged and shipped?

The models are dispatched by Royal Mail 2nd Class. Packaging is eco-friendly: the outer packaging is made in part from recycled materials and is fully recyclable, while the internal packing is acid-free and made from 99% recycled pulp fibres.

Are these suitable as toys or for children?

No. These are scale models and not toys. They contain small parts and are not suitable for minors due to choking hazard and the delicate nature of resin.

What primer should I use on these resin models?

The models can be primed with car primer such as Halfords grey primer or with Tamiya Fine Surface Primer. Both give a good key for acrylic paints.

What paints work best on these Penny Farthings?

After priming, acrylic paints work very well on the resin surface. Many modellers use hobby acrylics for both brush painting and airbrushing.

Can I paint the tyres white or cream?

Yes, white or cream tyres are historically appropriate for the period modelled, as black rubber tyres were not introduced until after the turn of the century. The painted examples use this approach.

Do I need to wash the parts before painting?

All items are cleaned and cured by hand, so further washing is usually not necessary. However, some modellers like to give resin parts a quick rinse in mild soapy water and allow them to dry fully before priming, especially if they’ve been handled a lot.

Will the resin react badly with standard hobby paints?

No. Once primed with a suitable primer such as Halfords grey or Tamiya Fine Surface Primer, standard acrylic hobby paints adhere very well and do not react adversely with the resin.

My model arrived with a part broken in the post, what should I do?

If the piece has clearly been damaged during shipping, please take clear photos of the damage and contact the seller. They will review the images and see what can be done to put things right.

What if I accidentally break a part after it arrives?

Resin can be quite delicate, and unfortunately the seller cannot be held responsible for breakages once the item has arrived safely. It’s best to handle the models gently and avoid dropping or bending any thin sections.

Some areas look slightly rough or have small marks. Is this normal?

Because each item is cleaned and cured by hand, you may occasionally find minor surface imperfections. These can usually be tidied up with very light sanding or scraping before priming, if you feel it’s necessary.

The wheels or frame look slightly bent. Can I fix this?

Mild warping on thin resin parts can sometimes be eased by very gently warming the area in hand-hot (not boiling) water, carefully straightening it, and then holding it in position under cold water. Take care not to force the resin, as it can snap.

The primer is not adhering well in a small area. What can I do?

If you find a spot where primer beads up, lightly rub that area with a fine abrasive (such as a fine sanding stick), optionally give it a quick wash in mild soapy water, let it dry completely, and reapply a light coat of primer.

Do the Penny Farthings come as a single piece or separate parts?

The Penny Farthings are supplied as resin models. Any minor finishing required is usually limited to light clean-up rather than complex assembly, but always inspect the parts on arrival in case a small piece has shifted or needs gentle straightening.

Do I need to remove mould lines or supports?

Items are cleaned and cured by hand, so most support marks are already dealt with. You may, however, find the occasional fine line or tiny nub that can be removed with a sharp hobby knife or fine file before priming.

What tools do you recommend for basic clean-up?

For light finishing, many modellers use:

• A sharp hobby knife or scalpel
• Fine needle files
• Very fine sanding sticks or paper

Work slowly and gently, as resin is more brittle than plastic.

How should I hold the model while painting such a small piece?

It helps to mount the Penny Farthing on a temporary handle, such as a piece of dowel or an old paint pot lid with a bit of double-sided tape or a small blob of removable adhesive. This keeps your fingers off the painted areas and reduces the risk of dropping it.

Any tips for painting fine details like spokes and handlebars?

Use a good-quality fine brush, thinned acrylic paint, and build up the colour in a couple of light coats rather than one heavy one. Turning the model frequently under good lighting helps you catch all the details without flooding them with paint.