OO Type 42 Wickham Inspection car with static display option

This is a model of a Wickham Type 42 Inspection car to use on a Tenshodo Spud chassis. The spud fits easily into place and uses the screw that comes with the spud. The main body is also a drop fit onto the sub chassis to allow for painting prior to assembly. The kit is printed using high detail resin in the UK. Also included is a dummy Spud chassis so that you can use the kit as a static display in a siding or diorama should you not wish to buy a spud. You can at a later date convert it back to a running model. 

The sale is for the body , the sub-chassis, dummy spud and tool boxes only, it is unpainted and without the real tenshodo spud which is shown for information purposes only.

The first picture shows the kit with a coat of grey primer so you can see how good the finish is, the kit also comes with optional fitting tool boxes that can be glued into place with superglue if required.

If you search on google for "Tenshodo motor bogie" you will find them easily. Anything up to the 26mm wheelbase will work with these or you can use the dummy included. 

The kit may require some minor finishing if required before painting. Condition is New and is dispatched by Royal Mail. Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres. 

FAQ – Product FAQs

Frequently Asked Questions – Wickham Type 42 Inspection Car Kit

What exactly is included in this Wickham Type 42 kit?

The sale is for the Wickham Type 42 inspection car body, the sub‑chassis, a dummy Tenshodo Spud chassis, and optional tool boxes. Everything is supplied unassembled (where applicable), unprimed and unpainted. The real powered Tenshodo Spud motor bogie shown in some photos is not included and is for illustration only.

What chassis or motor bogie does this kit use?

The kit is designed to use a Tenshodo Spud motor bogie. The Spud fits easily into place and is secured using the screw that comes with the Spud. Any Tenshodo motor bogie up to a 26 mm wheelbase will work with this kit. A dummy Spud chassis is included if you prefer a static model.

Is this kit ready to run out of the box?

No, this is not a ready-to-run model. It is a resin kit supplied unpainted and unassembled (if needed). You will need to provide your own Tenshodo Spud motor bogie if you want a powered, running model. The included dummy Spud allows you to build it as a static display model without a motor.

How is the main body fitted to the chassis?

The main body is a drop fit onto the sub‑chassis. This makes it easy to keep the body and chassis separate for priming and painting, then bring them together for final assembly. The Tenshodo Spud (when used) drops into place and is fixed with its own screw.

Where is the kit made and how is it produced?

The kit is printed in the UK using high‑detail resin. Each item is cleaned and cured by hand, with supports removed before packing. We do our best to remove visible support marks, though a little fine sanding may still be helpful before painting.

How is the kit packaged and shipped?

The kit is dispatched by Royal Mail. Packaging is eco‑friendly: the outer packaging is partly made from recycled materials and is fully recyclable, and the interior packing materials are acid‑free and made from 99% recycled pulp fibres.

My kit arrived with some faint marks or lines. Is that normal?

Yes, minor surface marks from the printing and support removal process can be normal on high‑detail resin parts. We remove all supports by hand and aim to minimise marks, but some very fine sanding or smoothing may be needed before priming to achieve the best finish.

What should I do if a part is broken in the post?

If your kit arrives damaged from shipping, please take clear photos of the damage and contact us. While we cannot be responsible for breakages after safe delivery, we will always do our best to help put things right when damage occurs in transit.

Can I convert a static model to a running model later?

Yes. The kit includes a dummy Spud chassis so you can initially build it as a static display model in a siding or diorama. You can later remove the dummy and install a real Tenshodo Spud motor bogie (up to 26 mm wheelbase) to convert it into a running model.

Is the resin very fragile?

Resin offers excellent fine detail but can be delicate, especially in thin areas. Avoid dropping the parts or applying excessive force when handling, sanding, or assembling. Once the item has arrived safely, we cannot be held responsible for accidental breakages, so careful handling is strongly recommended.

Do I need any special tools or adhesives?

Basic modelling tools are sufficient. A small file or fine‑grit sanding sticks are useful for smoothing any remaining support marks. For assembly, a good quality cyanoacrylate (superglue) works well on resin parts, including fitting the optional tool boxes.

How do I fit the Tenshodo Spud correctly?

The Tenshodo Spud is designed to drop into the sub‑chassis. Position the Spud so the wheelbase aligns with the cut‑outs, then secure it using the screw supplied with the Spud itself. Ensure it sits flat and can rotate freely without fouling the body or sub‑chassis.

The body doesn’t seem to sit square on the sub‑chassis. What can I do?

If the drop‑fit body does not sit perfectly square, check for:

• Any small bits of resin or sprue left on the mating surfaces
• Warping from heat or storage pressure
• Paint buildup on the sub‑chassis edges

Gently clean the contact areas with a fine file or sanding stick. Often removing a tiny amount of material from the inside edges of the body or the top of the sub‑chassis will allow it to sit correctly.

The Spud wheels rub or bind against the body. How can I fix this?

First, confirm that you are using a Tenshodo motor bogie with a wheelbase up to 26 mm. If the wheels rub, check that the Spud is fully seated in the sub‑chassis and not tilted. You can lightly relieve the inside of the body or sub‑chassis around the wheel cut‑outs with a fine file, removing only as much material as necessary so the wheels turn freely.

There are small surface imperfections. How should I clean them up?

Use fine‑grit sandpaper or sanding sticks (e.g., 600–1000 grit) to gently smooth any visible support marks or slight ridges. Work slowly and avoid flattening raised detail. After sanding, brush or blow away dust before priming.

My superglue joint has gone cloudy near clear or smooth surfaces. Any tips?

Cyanoacrylate can sometimes “fog” smooth resin surfaces. Use small amounts of glue and ensure good ventilation. You can mask surrounding areas before gluing or apply glue from inside where possible. If fogging occurs, a light polish and a fresh coat of primer or paint will usually hide it.

Do I need to wash the parts before painting?

The parts are cleaned and cured by hand before dispatch, so heavy washing is not usually necessary. However, many modellers prefer to give resin parts a quick wash in lukewarm water with a tiny drop of mild detergent, then rinse and allow them to dry fully before priming to ensure the best paint adhesion.

What preparation is recommended before priming?

After a light inspection and any necessary sanding, make sure the parts are free of dust and debris. If you choose to wash them, let them dry completely. Check that all mating surfaces remain clean and unpainted where you intend to glue later, as paint can weaken glue joints.

Which primer and paints can I use on this resin?

The resin is suitable for most hobby primers and paints designed for miniatures and models. Choose a primer compatible with resin and your chosen paint type (acrylic, enamel, etc.). The first photo of the kit shows it with a coat of grey primer to illustrate the surface finish; a similar neutral primer works very well.

Should I assemble the model before or after painting?

The body and sub‑chassis are designed to be painted separately as a drop‑fit. Many modellers find it easier to:

• Clean and test‑fit all parts
• Prime and paint the body, sub‑chassis, and tool boxes separately
• Then assemble and do any final touch‑ups

This approach helps you reach all the details and keep glue joints clean.

How do I fit and paint the optional tool boxes?

The kit includes optional tool boxes that can be glued into place with superglue if you want them fitted. It is often easiest to prime and paint the tool boxes separately, then glue them onto the painted body or sub‑chassis once everything is dry. You can weather them to match your layout’s style, from lightly used to well‑worn yard equipment.