G-Scale figure - 3D scan of a real person - MD033 (also GN15)

These figures are 3d scanned from real people to get both realistic looks and poses! 

This figure is suitable as a Driver or general person either mounted or standing around in the yard. He is approx 77mm tall and is in G-Scale 1:22.   

(like the scale of LGB/Bachmann etc.)

The model is printed here in the UK  using high detail resin. The model is supplied unpainted and can be primered with halfords grey primer or tamiya fine surface primer.

All items are cleaned and cured by hand, and the figures may require some minor finishing if needed before painting. The condition is new and they are dispatched by Royal Mail 2nd class.

Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres.

Please do bear in mind that resin can be quite delicate so try to avoid dropping your parts! Sadly, we cant be held responsible for breakages once your item has arrived. However, if the piece is broken in the post, please provide images and we will see what we can do to help to make things good.

Needless to say these items are not toys and are not suitable for minors as they could be a choking hazard because of small parts. 

Sold under commercial license from Design Scan Print 3D

FAQ – Product FAQs

General Product FAQs

What scale is this figure and how tall is it?

This figure is G-Scale 1:22, the same general scale as LGB and Bachmann G-scale ranges. The model stands at approximately 77mm tall, making it suitable as a driver or a general figure standing around the yard.

How are these figures created?

The figures are 3D scanned from real people to capture realistic proportions, facial features and natural poses. This scan data is then used to produce a highly detailed 3D print in resin.

What material is the figure printed in?

The model is printed in the UK using high-detail resin. This material allows fine detail to be reproduced very crisply, ideal for realistic model railway figures.

Is the figure supplied painted?

No, the figure is supplied unpainted so you can finish it in your own livery and style. A suitable primer is recommended before you start painting.

How is the item shipped and what is the condition?

Each figure is supplied as a new item, cleaned and cured by hand, and dispatched via Royal Mail 2nd Class. The figure may require some minor finishing before painting, depending on your preferred standard.

Is this product suitable for children?

No, these figures are not toys and are not suitable for minors. They contain small parts and can pose a choking hazard. They are intended for adult hobbyists and collectors.

Troubleshooting FAQs

My figure arrived broken in the post, what should I do?

If your figure has been damaged in transit, please take clear photos of the damage and packaging and contact the seller. While breakages after arrival cannot be covered, postal damage will be reviewed and the seller will see what can be done to put things right.

There are small marks or lines on the surface, is this normal?

Minor surface marks or faint layer lines can occur with high-detail resin printing. These are usually easy to smooth with light sanding or careful scraping before priming. A little preparation is normal for resin figures.

The figure seems a bit flexible or delicate, is that a problem?

Resin can be quite delicate, especially on thin parts. A slight degree of flex is normal, but avoid bending or stressing the figure. Handle with care, particularly around hands, arms and any fine edges.

The primer is not adhering evenly, what can I do?

If primer beads or looks patchy, gently wash the figure in warm (not hot) soapy water, rinse thoroughly and allow it to dry completely. Then re-apply a light mist coat of primer, building up coverage in several thin passes rather than one heavy coat.

The figure does not fit the cab or scene as I expected, any tips?

Because the figure is based on a real person and printed at 1:22, it is naturally proportioned. If space is tight, you may need to slightly adjust your cab interior or seating position, or carefully remove a small amount of material from the figure’s base or boots to achieve the ideal fit.

Assembly & Painting FAQs

Do I need to assemble the figure?

This figure is supplied as a single resin piece, so no major assembly is usually required. You may wish to attach it to a base, cab floor, or footplate using a suitable adhesive once you have test-fitted the pose in your layout.

What primer should I use before painting?

The figure can be primed with Halfords grey primer or Tamiya Fine Surface Primer, as recommended. Apply several light coats rather than one heavy coat to preserve the fine scanned detail.

How should I prepare the figure before priming?

Although the items are cleaned and cured by hand, it is good practice to:

• Inspect for any small nubs or supports and carefully remove them.
• Lightly sand or scrape any rough spots if needed.
• Optionally wash in warm soapy water, rinse and let dry fully.

This helps ensure a smooth surface and good primer adhesion.

What type of paints work best on this resin figure?

Once primed with a suitable model primer, most hobby acrylic or enamel paints designed for miniatures or model railways will work well. Always apply thin coats to preserve the fine details captured by the 3D scan.

Any tips for painting a realistic driver or yard worker?

Because the figure is based on a real person, subtle painting brings out the best results. Consider:

• Using muted workwear colours for trousers, jackets and caps.
• Adding gentle shading and highlights to folds and creases.
• Finishing with a light weathering wash to suggest coal dust, oil or general yard grime.

Take your time and build up colour in layers for a natural, lived-in look that suits G-scale layouts.