G-Scale seated driver figure - from 3D scan of a person - MD005 (also GN15)

These figures are 3d scanned from real people to get both realistic looks and poses! 

A seated figure geat for use a a driver. He is approx 63mm tall (seated) and is in G-Scale 1:22.5   

(similar scale of LGB/Bachmann etc.)

The model is printed here in the UK  using high detail resin. The model is supplied unpainted and can be primered with halfords grey primer or tamiya fine surface primer.

All items are cleaned and cured by hand, and the figures may require some minor finishing if needed before painting. The condition is new and they are dispatched by Royal Mail 2nd class.

Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres.

Please do bear in mind that resin can be quite delicate so try to avoid dropping your parts! Sadly, we cant be held responsible for breakages once your item has arrived. However, if the piece is broken in the post, please provide images and we will see what we can do to help to make things good.

Needless to say these items are not toys and are not suitable for minors as they could be a choking hazard because of small parts. 

Sold under commercial license from Design Scan Print 3D

FAQ – Product FAQs

General Product FAQs

What scale is this seated driver figure?

The figure is G-Scale 1:22.5 and is approximately 63 mm tall in the seated position, making it suitable for layouts similar in scale to LGB and Bachmann.

How were these figures created?

The figures are 3D scanned from real people to capture realistic looks and natural poses, then produced as high-detail resin prints.

Is the figure supplied painted?

No, the figure is supplied unpainted so you can finish it in the colours that best match your own locomotives and rolling stock.

Where is the model printed?

The model is printed in the UK using high-detail resin, then cleaned and cured by hand before dispatch.

How is the figure packaged and shipped?

The figure is dispatched by Royal Mail 2nd Class in eco-friendly packaging. The outer packing is partly made from recycled materials and is fully recyclable, and the inner packing is acid-free and made from 99% recycled pulp fibres.

Is this figure suitable for children?

No, these items are not toys and are not suitable for minors. They contain small parts and can pose a choking hazard.

Troubleshooting FAQs

My figure arrived broken in the post, what should I do?

If your figure has been damaged in transit, please take clear photos of the damage and the packaging and contact us. We will review the images and see what we can do to help put things right.

The resin looks a bit rough in places, is this normal?

All items are cleaned and cured by hand, and some minor surface texture or small marks can occur. A light sand or tidy-up before priming is perfectly normal with high-detail resin figures.

There are small marks or lines on the figure, how can I improve the finish?

Minor finishing is sometimes required before painting. You can gently clean up small marks with fine sandpaper, small files, or a sharp hobby knife, taking care not to damage delicate details.

My figure seems very delicate, is that a fault?

Resin is naturally more brittle than plastic and fine details can be delicate. This is not a fault, but a trade-off for the high level of detail. Handle the figure carefully and avoid dropping it or applying pressure to thin parts.

The figure doesn’t fit my cab perfectly, what can I do?

Cab interiors vary between different G-scale locomotives. If needed, you can gently adjust the figure’s base or the seating area with light sanding or careful trimming so it sits comfortably in your chosen locomotive.

Assembly & Painting FAQs

Do I need to assemble the figure?

The figure is supplied as a single resin piece, so no major assembly is usually required. Just check for any small bits of flash or support remnants and tidy them up before painting.

How should I prepare the figure before painting?

Before painting, we recommend:

• Inspecting the figure for any small mould lines or support marks and carefully cleaning them up.
• Making sure the surface is free from dust or handling residue.
• Applying a suitable primer to give your paint a good key.

Which primers work well on this resin?

The model can be primed with Halfords grey primer or Tamiya Fine Surface Primer, both of which adhere well to this high-detail resin.

Can I use standard model paints on this figure?

Yes, once primed with a suitable primer such as Halfords grey or Tamiya Fine Surface Primer, you can use your usual model paints on the figure.

Any tips for painting a realistic G-scale driver?

For a realistic finish, try building up thin layers of paint over the primer and pick out details like the face, hands, and clothing folds carefully. Working slowly and letting each layer dry will help you make the most of the realistic pose and scanned detail.