G-Scale figure - 3D scan of a real person - MD042 (also GN15)

These figures are 3d scanned from real people to get both realistic looks and poses! 

This figure is suitable as a Driver or general person either mounted or standing around in the yard. He is approx 78mm tall and is in G-Scale 1:22.   

(like the scale of LGB/Bachmann etc.)

The model is printed here in the UK  using high detail resin. The model is supplied unpainted and can be primered with halfords grey primer or tamiya fine surface primer.

All items are cleaned and cured by hand, and the figures may require some minor finishing if needed before painting. The condition is new and they are dispatched by Royal Mail 2nd class.

Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres.

Please do bear in mind that resin can be quite delicate so try to avoid dropping your parts! Sadly, we cant be held responsible for breakages once your item has arrived. However, if the piece is broken in the post, please provide images and we will see what we can do to help to make things good.

Needless to say these items are not toys and are not suitable for minors as they could be a choking hazard because of small parts. 

Sold under commercial license from Design Scan Print 3D

FAQ – Product FAQs

General Product FAQs

What scale is this figure and how tall is it?

This figure is G-Scale 1:22 and stands at approximately 78 mm tall, making it ideal for layouts that match LGB, Bachmann and similar large-scale garden railway ranges.

What can this figure be used for on my layout?

The figure is designed to work well as a driver or as a general person standing or sitting around the yard, engine shed, or station area, adding realistic human presence to your scene.

How are these figures created?

Each figure is 3D scanned from real people to capture natural poses and realistic body shapes, then produced using high-detail resin printing here in the UK.

What material is the figure made from?

The figure is printed in high detail resin, which allows for fine surface detail and crisp features suitable for close-up viewing and careful painting.

Is the figure new or second-hand?

All figures are supplied in new condition, cleaned and cured by hand before dispatch.

How is the figure packaged and shipped?

Figures are dispatched by Royal Mail 2nd Class in eco-friendly packaging. The outer packaging is made in part from recycled materials and is fully recyclable, while the inner packing is acid-free and made from 99% recycled pulp fibres.

Troubleshooting & Safety FAQs

My figure arrived damaged in the post, what should I do?

If your figure appears to have been damaged in transit, please take clear photos of the damage and the packaging and contact us. We cannot be responsible for damage after safe delivery, but if it has broken in the post we will do our best to help put things right.

The resin looks delicate; how should I handle it?

Resin can be quite fragile, especially around finer details. Handle the figure gently, avoid dropping it, and support thinner parts when working on it to reduce the risk of breakage.

There are small marks or lines on the figure, is this normal?

Minor surface marks or faint layer lines can occur with resin printing. These can usually be smoothed with light sanding or scraping during your normal finishing process before priming and painting.

Is this figure safe for children?

No. These figures are not toys and are not suitable for minors. They contain small parts and can pose a choking hazard, so they should be kept out of reach of children.

What if a part breaks after I’ve started working on it?

Once the item has arrived safely, we cannot be held responsible for accidental damage such as drops or mishandling. However, simple breaks can often be repaired with a suitable model resin or cyanoacrylate (super) glue and careful re-finishing.

Assembly & Painting FAQs

Does the figure come painted?

No, the figure is supplied unpainted so you can finish it to match your own locomotives, rolling stock, and layout colour schemes.

Do I need to do any preparation before painting?

All items are cleaned and cured by hand, but the figure may require some minor finishing such as light sanding, scraping, or filling of small imperfections before you apply primer and paint.

Which primers work well on this resin?

The figure can be primed with Halfords grey primer or Tamiya Fine Surface Primer. Apply in thin, even coats and allow to dry fully before painting.

Can I modify or reposition the figure?

The figure is printed as a fixed pose, but experienced modellers can carefully trim, cut, or re-position parts using standard modelling tools. Take extra care, as resin is delicate and can snap if stressed.

Any tips for painting a realistic driver or yard worker?

After priming, build up thin layers of acrylic or enamel paints. For a driver or yard worker, muted workwear colours, weathered boots, and subtle shading around folds and facial features help bring out the realistic 3D-scanned pose and detail.