G-Scale Driver figure in flat hat - 3D scan of a real person - MD019 (like GN15)

These figures are 3d scanned from real people to get both realistic looks and poses! 

This unpainted figure is suitable as a Driver either mounted or standing around in the yard. He is approx 77mm tall and is in G-Scale 1:22.5

(like the scale of LGB/Bachmann etc.)

The model is printed here in the UK  using high detail resin. The model is supplied unpainted and can be primered with halfords grey primer or tamiya fine surface primer.

All items are cleaned and cured by hand, and the figures may require some minor finishing if needed before painting. The condition is new and they are dispatched by Royal Mail 2nd class.

Our packaging is Eco friendly, the exterior packing is made in part from Recycled Materials and is fully recyclable, the interior packing materials are acid free and made from 99% recycled pulp fibres.

Please do bear in mind that resin can be quite delicate so try to avoid dropping your parts! Sadly, we cant be held responsible for breakages once your item has arrived. However, if the piece is broken in the post, please provide images and we will see what we can do to help to make things good.

Needless to say these items are not toys and are not suitable for minors as they could be a choking hazard because of small parts. 

Sold under commercial license from Design Scan Print 3D

FAQ – Product FAQs

Frequently Asked Questions

What scale is this driver figure and how tall is it?

This driver is G-Scale 1:22.5 (the same scale used by LGB and Bachmann, etc.) and stands at approximately 77 mm tall, making him ideal for use as a locomotive driver or yard figure.

Is the figure painted or unpainted?

The figure is supplied unpainted. You can finish it in your own colours to match your layout, railway company, or era.

What material is the figure made from?

The figure is printed in the UK using high-detail resin. This allows very fine detail from the original 3D scan of a real person to be captured in the model.

How are the poses created?

The figure has been 3D scanned from a real person, so both the look and pose are based on an actual human subject, giving a very natural stance whether used as a mounted driver or standing in the yard.

How is the item packaged and shipped?

The figure is dispatched by Royal Mail 2nd Class. Our packaging is eco-friendly: the outer packaging is partly made from recycled materials and is fully recyclable, while the inner packing is acid-free and made from 99% recycled pulp fibres.

Is this figure suitable for children?

No. These figures are not toys and are not suitable for minors, as small parts can pose a choking hazard. They are intended for adult model makers and collectors.

What should I do if my figure arrives damaged in the post?

If the figure is damaged during transit, please take clear photos of the damage and the packaging and contact us. While we cannot be responsible for damage after safe delivery, we will always do our best to help make things right when breakages occur in the post.

Can the resin figure break easily?

Resin can be quite delicate, especially at thinner areas like arms or tools. Try to avoid dropping the figure or applying excessive pressure when handling, cleaning, or fitting it into a cab or scene.

Do you accept responsibility for breakages after delivery?

We cannot be held responsible for breakages once the item has arrived safely with you. However, if you have any issues or questions about handling or repairing a figure, feel free to get in touch for advice.

Where is this figure produced?

Each figure is printed, cleaned, and cured by hand here in the UK under a commercial licence from Design Scan Print 3D.

Is there any finishing required before painting?

All items are cleaned and cured by hand, but you may find that a little minor finishing is useful before painting. This can include:

• Lightly smoothing any faint layer lines
• Removing tiny nibs or support marks if present
• Checking the base or feet sit flat where you plan to mount the figure

What primer should I use on the figure?

The figure can be primed with Halfords grey primer or Tamiya Fine Surface Primer. Apply in thin coats to preserve the fine detail from the 3D scan.

Do I need to wash the figure before priming?

The figure is supplied cleaned and cured, so additional washing is usually not necessary. If you prefer, you can give it a gentle rinse in lukewarm water and allow it to dry fully before priming, but avoid harsh scrubbing.

How should I handle the figure during assembly and painting?

Handle the figure by the sturdier areas (such as legs or torso) rather than thin details. When painting, it often helps to:

• Temporarily fix the feet to a holder or painting block
• Avoid gripping delicate parts tightly
• Let each paint layer dry fully before handling again

What type of paints work best on this resin?

Once primed with a suitable model primer such as Halfords grey or Tamiya Fine Surface Primer, you can use your usual model paints (for example, standard hobby acrylics or enamels) to finish the figure to match your railway.

How can I fit the driver into my locomotive or yard scene?

After priming and test-fitting, you can carefully position the figure as a mounted driver in a cab or standing in the yard. If needed, you can gently sand the base or adjust the mounting point so he stands securely in your chosen spot.