NG7 Wagon Loads suitable for the Bachmann Dinorwic Slate Wagon

Some of these kits may require some minor assembly, the Petrol wagon supports can be painted first and then with a small dab of superglue fixed to the bowser.

FAQ – Product FAQs

What exactly is this product?

This is a resin-printed wagon load designed to sit on top of a Dinorwic Slate Wagon and add extra realism to your model railway layout. You choose one load type per order: Petrol/Diesel tanker, Gunpowder wagon, or Dump wagon.

What load types are available?

There are three wagon load styles currently available:

• Petrol/Diesel tanker
• Gunpowder wagon
• Dump wagon

Each option is supplied as a single grey resin piece (with minor assembly for some variants).

What material and colour are the loads supplied in?

All loads are resin printed and supplied in grey. They are cleaned and cured by hand, with supports removed, and are ready for you to prime and paint.

Are the items pre-painted like the photos?

No, the photos show painted examples for reference only. Your wagon load will arrive unprimed and unpainted so you can finish it to match your own layout and stock.

Do these loads fit other wagons too?

They are designed specifically as wagon toppers for Dinorwic Slate Wagons. They simply sit on the wagon to represent a realistic load. If you try them on other wagons, you may need to adjust or pack the load to suit your particular model.

Is this a full wagon kit or just the load?

This listing is for one wagon load only, not a complete wagon. You will need your own Dinorwic Slate Wagon; the load is intended to sit on top of it.

My load arrived with a small mark or line – is that normal?

All items are cleaned and cured by hand, and we do our very best to remove support marks. However, with resin printing, very fine lines or tiny marks can sometimes remain. These are usually easily dealt with using light sanding before priming.

The surface looks a bit rough in places. How can I improve it?

A little fine sanding will usually smooth any remaining support marks or print texture. Work gently with fine-grit abrasive, then clean off dust before priming. Once primed and painted, these minor imperfections are normally invisible.

What should I do if my item arrives broken in the post?

If the piece is damaged during delivery, please take clear photos of the damage and the packaging and contact the seller. They will review the images and let you know what can be done to help.

Can you replace parts if I break them after delivery?

Resin can be quite delicate, and the maker cannot be held responsible for breakages once the item has arrived safely. It’s best to handle the load carefully, avoid dropping it, and store it safely when not in use.

Why does my load feel delicate?

Resin allows for fine detail, which is ideal for model railway loads, but it can be more brittle than plastic. Thin parts, edges, and supports are especially vulnerable, so handle the load by its stronger, solid areas whenever possible.

Can I fix a small break myself?

Many small breaks can be repaired with a tiny amount of cyanoacrylate (superglue). Test-fit the pieces first, apply a minimal dab of glue, and hold them in place until set. Avoid flooding the joint, as excess glue can obscure detail.

Do these loads need assembly?

Some loads are a single piece and need no assembly. Others, such as the Petrol/Diesel tanker, may require minor assembly of small parts like supports. Any assembly needed is straightforward and suitable for typical model railway hobby tools and skills.

How do I assemble the Petrol/Diesel tanker version?

For the Petrol/Diesel tanker, the supports can be painted first, then fixed to the bowser with a small dab of superglue. Allow the glue to fully cure before placing the completed load on your wagon.

What tools and materials do I need for assembly?

For minor assembly you will typically need:

• Cyanoacrylate (superglue) for bonding parts
• A fine file or sanding stick for any light clean-up
• Fine tweezers or small pliers for handling tiny parts

Always work in a well-ventilated area and take care when using sharp tools and adhesives.

How should I prepare the load before painting?

Check for any remaining support marks and gently sand them if needed. Make sure the piece is free from dust and fingerprints, then apply a suitable primer. Once the primer is dry, you can proceed with your chosen paint scheme.

What paints and finishes work best on these loads?

The maker recommends grey car primer as a base, followed by acrylic paints and an ink wash to bring out the detail. This combination gives a durable finish and nicely picks out rivets, planking, and other surface texture.

Any tips for painting realistic wagon loads?

After priming, build up colour in thin layers of acrylics, then use an ink wash to add depth to recesses and panel lines. You can finish with dry-brushing lighter shades on edges and raised areas to simulate wear, and add subtle weathering to match your layout’s era and environment.